Small Scale Crushing Quartz

Small Scale Crushing Quartz
Small Scale Crushing Quartz
Small Scale Crushing Quartz

Project Service

According to SBM's business coverage, we have established strong installation engineer teams and divided them into several parts according to the businesses, including building aggregate team, ore processing team and industrial milling team. Each team consists of young, middle-aged, and old engineers, fully satisfying business requirement and fulfilling talent cultivation objective.

Summary : Small Scale Quartz Crushing Machine Failure Analysis And Solution Failure Analysis 1. Sealing Device Failure In the production, pay attention to check the o-ring seal between the drive shaft frame and the main frame, the seal …

Design Scheme

Small Scale Quartz Crushing Machine Failure Analysis And Solution

Failure Analysis

1. Sealing Device Failure

In the production, pay attention to check the o-ring seal between the drive shaft frame and the main frame, the seal ring between the oil collector and the oil slinger, the wear of the o-ring seal ring between the oil slinger and the drive shaft. Because these parts will be subject to wear and deformation after long-term use, lose the elasticity required for effective sealing, and the sealing device will fail, which will cause the problem of oil leakage of the Small Scale Quartz Crushing Machine.

2. The Oil Return Pipe Is Blocked

During production, check whether there is any dirt in the main oil drain hose or pipe. Check if there is any dirt in the long hole of the drive shaft frame under the drive shaft. The accumulation of dirt will hinder the flow of oil, especially the low oil temperature. At the time, the oil cannot be quickly discharged from the inside of the Small Scale Quartz Crushing Machine, causing the Small Scale Quartz Crushing Machine to leak oil.

3. Improper Work Pressure

Lubricating oil enters the lower part of the main shaft from the inlet pipe and is rubbed by the lubricating friction disc. If the working pressure of the lubrication system is improper, the oil will be ejected from the shaft gap, causing the lubricating oil to leak downward along the outer circumference of the sealing cylinder.

4, The Component Gap Is Not Reasonable

If the gap between the inner wall of the base oil sump and the weight body oil retaining plate is too small, the lubricating oil between them will easily form an oil seal under the action of tension during the working process of the Small Scale Quartz Crushing Machine. Under the pressure of the air pressure, the oil seal will continuously overflow from the dust seal along the inner wall of the main frame.

Solution

  • 1. In order to ensure the normal operation of the Small Scale Quartz Crushing Machine, it is recommended to check the sealing device regularly.
  • 2. When there is dirt in the return pipe, the oil pipe should be cleaned up in time to avoid blockage of the return pipe.
  • 3. Adjust the working pressure of the lubrication system.
  • 4. Adjust the component clearance.

In the long-term use, the Small Scale Quartz Crushing Machine not only needs to maintain a good lubrication system, but also needs to check regularly, solve the fault in time, and ensure the efficient operation of the Small Scale Quartz Crushing Machine, in order to bring production efficiency and benefits to the enterprise.

Crusher Equipment

CS Spring Cone Crusher
CS Spring Cone Crusher
PEW Jaw Crusher
PEW Jaw Crusher
VSI5X Sand Maker
VSI5X Sand Maker
C6X Jaw Crusher
C6X Jaw Crusher
PE Jaw Crusher
PE Jaw Crusher
VSI Sand Maker
VSI Sand Maker

Auxiliary Facilities